Visitor No.2944352 ..   
TrustPassKenplas Industry Ltd.Discussion Forum
　
Kenplas Forum ==> Injection Mold
1
TopicRepliesViewsLast Update
Valve Gated Parison Mold Problems 0 237 2015-4-4 19:40:17
Valve Gated Mold Issues 0 238 2015-4-4 19:28:24
cooling water requirement for preform molds 1 1056 2015-2-20 22:32:58
PCO 28mm for water cap 3 1914 2012-11-24 16:15:31
Specifications of all design geometry of Cap Thread 8-425 0 905 2012-8-6 12:21:22
MOLD DESIGN -- DESIGN OF GATES 1 2156 2011-12-1 15:35:34
ptfe molding 0 869 2011-8-2 18:58:31
Chemical etching on mould 3 1396 2010-9-9 20:00:47
bottle with hollow Handle 1 1201 2010-6-17 13:16:46
Texture sanblast on logo sidewall APET cup-Thermoforming-pressure forming 1 1235 2010-6-1 22:23:15
MOLD DESIGN -- VENTING 3 1999 2009-4-22 0:38:17
I need a metal thread tap for standard 2 litre PET Soda Bottle threads 0 6068 2009-1-9 23:49:06
Cavity Design 1 1503 2008-6-18 0:54:45
PART DESIGN -- DRAFT 1 2293 2005-6-29 21:05:43
PART DESIGN -- RADII 1 1727 2005-6-29 21:05:03
PART DESIGN - MOLD SHRINKAGE 1 2513 2005-6-29 20:37:18
1
 

Start A New Topic
Temporarily shut down, no new message, sorry.

Name:

Email:
Topic Name:

Message:

(Max.  2KB)
































Attachment:     (Max. 500kB, .RAR.ZIP.JPG.GIF only)
Verification:

This forum published since July 03, 2002. Renewed on June 22, 2005.

[Plastics Project] [Plastics Machinery] [Plastics Mold] [Discussion Forum] [Contact Kenplas]
Copyright © 2025 Kenplas Industry Limited, Hangzhou Kenplas Machinery Ltd.              Powered by Alentus.